|
Sunday, 1 August 2010
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Product Archive
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Model | PN-S525 | |||
| LCD module | 52" wide (132.2 cm diagonal) ASV low-reflection black TFT LCD | |||
| Max. Resolution | (pixels) | 1920 x 1080 | ||
| Max. Colours | 16.77 M colours (8 bits/colour) | |||
| Pixel pitch | 0.600 mm x 0.600 mm (H x V) | |||
| Viewing angle | 176º right/left/up/down (contrast ratio = 10) | |||
| Screen active area (mm) | 1152.0 x 648.0 mm | |||
| Computer Input Signal | Digital (DVI 1.0 standard -compliant), Analog RGB (0.7 Vp-p) [75?] | |||
| Sync | Horizontal/vertical separate (TTL: positive/negative), Sync-on-green, | |||
| Composite sync (TTL: positive/negative) | ||||
| Video Colour System | PAL, PAL-60, SECAM, NTSC (3.58 Mhz), NTSC (4.43 MHz) | |||
| Plug and play | VESA DDC2B | |||
| Power management | VESA DPMS, DVI DMPM | |||
| Input terminals | PC/AV | Digital | DVI-D 24 pin (HDCP compatible) x 1 | |
| HDMI x 1 | ||||
| PC | Analog | Mini D-sub 15 pin | ||
| BNC*1*2 x 1 | ||||
| AV | Composite Video | BNC x 1 | ||
| S-Video | x1 | |||
| Component | BNC (Y, Cb/Pb, Cr/Pr)*1 x 1 | |||
| Audio | RCA pin (L/R) x 1 | |||
| Output terminals | PC/AV | Digital | DVI-D 24 pin x 1 | |
| Audio | RCA pin (L/R) x 1 | |||
| Serial (RS232) | D-sub 9 pin x 1 | |||
| Speaker | & W + 7 W [6?] | |||
| LAN terminal | 10 BASE-T/100 BASE-TX | |||
| Power requirement | AC 100V - 240V, 50/60 Hz | |||
| Operating temperature | 0ºC to 40º C | |||
| Operating humidity | 20% to 80% (no condensation) | |||
| Power consumption | 275 W (Input signal waiting mode: 12 W, Standby mode: 2.0 W | |||
| Dimensions | Approx. 1,254 x 149 x 742) (excluding protrusions) | |||
| Weight | Approx. 39 Kg | |||
|
This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below. In the event of any defect arising in the equipment during the warranty period, such repairs should only be carried out by the Dealer from which the unit was originally purchased or a Service Centre approved by Sharp to service this type of equipment. These repairs would be carried out at no charge to the owner, subject to the conditions specified herein. The owner is responsible for any transportation and insurance costs if the product has to be returned for repair. This warranty does not extend to accessories or defects or injuries caused by or resulting from causes not attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury caused by or resulting from misuse, abuse, neglect, accidental damage, improper voltage, liquid spillage, vermin infestation, software, use of consumables other than those approved by Sharp or any alterations made to the product which are not authorised by Sharp. Please retain your sales documentation, as this should be produced to validate a warranty claim. This warranty is in addition to and in no way limits, varies or excludes any express and implied rights and remedies under any relevant legislation in the country of sale. However to the extent permitted by such legislation. Sharp excludes any liability for any indirect or consequential damage arising from the purchase or use of the product. To the extent permitted by law, Sharp excludes all implied warranties and conditions and where the product is one that is not normally required for personal, domestic or household use. Sharp limits its liability to repair or replacement (at Sharp's option) of materials or workmanship which are found by Sharp to be defective. IMPORTANT NOTICE: This warranty applies to products sold in Australia & New Zealand WARRANTY PERIODS
|